RAM 1500 2WD 2021 Owner'S Manual Download Page 118

Page: 118 / 496

116

GETTING TO KNOW YOUR INSTRUMENT PANEL

ISPLAY

ENU

TEMS

Push and release the up or down arrow

button until the desired selectable menu icon is

highlighted in the instrument cluster display.

Speedometer

Push and release the up or down arrow

button until the speedometer menu item is

highlighted in the instrument cluster display.

Push and release the OK button to cycle the

display between mph and km/h.

Vehicle Info

Push and release the up or down arrow

button until the Vehicle Info menu icon is

displayed in the instrument cluster display.

Push and release the left or right arrow

button to scroll through the information

submenus and push and release the OK button

to select or reset the resettable submenus.



Tire Pressure Monitor System



Air Suspension — If Equipped



Coolant Temperature — If Equipped



Trans Temperature (Automatic only)



Oil Temperature



Oil Pressure — If Equipped



Oil Life



Battery Voltage — If Equipped



Gauge Summary — If Equipped



Coolant Temp



Trans Temp



Oil Temp



Oil Pressure



Engine Hours

Off-Road

Push and release the up or down arrow

button until the Off-Road menu icon is displayed

in the instrument cluster display. Push and

release the left or right arrow button to

scroll through the information submenus.



Drivetrain



Front Wheel Angle: displays the graphical

and numerical value of calculated

average front wheel angle from the

steering wheel orientation.



Transfer Case Lock Status: displays

“Lock” graphic only during 4WD High,

4WD High Part Time, 4WD Low status.



Axle Lock And Sway Bar Status (If

Equipped): displays front and rear or rear

only axle locker graphic, and sway bar

connection graphic with text message

(connected or disconnected).



Pitch And Roll



Displays the pitch and roll of the vehicle

in the graphic with the angle number on

the screen.

NOTE:

When vehicle speed becomes too high to

display the pitch and roll, “- -” will display in

place of the numbers, and the graphic will be

greyed out. A message indicating the necessary

speed for the feature to become available will

also display.

Driver Assist — If Equipped

The Driver Assist menu displays the status of

the ACC and LaneSense systems.
Push and release the up or down arrow

button until the Driver Assist menu is displayed

in the instrument cluster display.

21_DT_OM_EN_USC_t.book Page 116

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands