RAM 1500 2WD 2021 Owner'S Manual Download Page 96

Page: 96 / 496

GETTING TO KNOW YOUR VEHICLE

(Continued)

The interior of the RamBox will automatically

illuminate when the lid is opened. The timing

can be adjusted within Uconnect Settings

page 237.

Cargo bins feature two removable drain plugs

(to allow water to drain from bins). To remove

plug, pull up on the edge. To install, push plug

downward into drain hole.

RamBox Drain Plug Removal

NOTE:

Provisions are provided in the bins for cargo

dividers. These accessories (in addition to other

RamBox accessories) are available from Mopar.

If equipped, a 115 Volt (400 Watts Maximum)

inverter may be located inside the RamBox of

your vehicle. The inverter can be turned on by

the Instrument Panel Power Inverter switch

located to the left of the steering wheel. The

RamBox inverter can power cellular phones,

electronics and other low power devices

requiring power up to 400 Watts. Certain

high-end video game consoles exceed this

power limit, as will most power tools.

RamBox Power Inverter

The Instrument Panel Power Inverter switch is

only found on vehicles equipped with a

RamBox. The switch only controls on/off

operation of the power outlet in the RamBox; it

does not control on/off operation of the power

outlets located inside the cabin of the vehicle.

Instrument Panel Power Inverter Switch

AFETY

ARNING

Carefully follow these warnings to help prevent

personal injury or damage to your vehicle:

CAUTION!

Leaving the lid open for extended periods of

time could cause the vehicle battery to dis

charge. If the lid is required to stay open for

extended periods of time, it is recommended

that the bin lights be turned off manually

using the on/off switch.

WARNING!



Always close the storage bin covers when

your vehicle is unattended.

21_DT_OM_EN_USC_t.book Page 94

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands