RAM 1500 2WD 2021 Owner'S Manual Download Page 402

Page: 402 / 496

400

SERVICING AND MAINTENANCE

AINTENANCE

LAN

— D

IESEL

UEL

B5 B

IODIESEL

Refer to the Maintenance Schedules for required maintenance.

NOTE:

Using white lithium grease, lubricate the door hinge roller pivot joints twice a year to prevent premature wear.

At Every Oil Change Interval As Indicated By Oil Change Indicator System:



Change oil and filter.



Completely fill the Diesel Exhaust Fluid tank.



Drain water from fuel filter assembly.



Rotate the tires. Rotate at the first sign of irregular wear, even if it occurs before the oil indicator system turns on.



Inspect battery and clean and tighten terminals as required.



Inspect the CV/Universal joints.



Inspect brake pads, shoes, rotors, drums, hoses and park brake.



Inspect engine cooling system protection and hoses.



Inspect exhaust system.



Inspect engine air cleaner if using in dusty or off-road conditions. Replace engine air cleaner, as necessary.

At Every Second Oil Change Interval As Indicated By Oil Change Indicator System:



Change fuel filter.

21_DT_OM_EN_USC_t.book Page 400

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands