RAM 1500 2WD 2021 Owner'S Manual Download Page 57

Page: 57 / 496

GETTING TO KNOW YOUR VEHICLE

EADLIGHT

ELAY

To assist when exiting the vehicle, the headlight

delay feature will leave the headlights on for up

to 90 seconds. This delay is initiated when the

ignition is placed in the OFF position while the

headlight switch is on, and then the headlight

switch is cycled off. Headlight delay can be

cancelled by either turning the headlight switch

on then off, or by placing the ignition in the ON

position.

NOTE:



This feature can be programmed through the

Uconnect system

page 237.



The headlight delay feature is automatically

activated if the headlight switch is left in the

AUTO position when the ignition is placed in

the OFF position.

IGHTS

-O

EMINDER

If the headlights, parking lights, or cargo lights

are left on after the ignition is placed in the OFF

position, the vehicle will chime when the

driver’s door is opened.

IGHTS

— I

QUIPPED

The fog lights are turned on by rotating the

headlight switch to the parking light or headlight

position and pushing in the fog light button on

the headlight switch.

Fog Light Button

The fog lights will operate only when the parking

lights are on or when the vehicle headlights are

on low beam. An indicator light located in the

instrument cluster will illuminate when the fog

lights are on. The fog lights will turn off when the

button is pushed a second time, when the

headlight switch is rotated to the off position, or

the high beam is selected.

If the fog lights are off, one of the fog lights will

illuminate depending on the direction in which

the vehicle is turning. This will provide

increased visibility while turning, depending on

the angle of the steering wheel.

URN

IGNALS

Move the multifunction lever up or down to

activate the turn signals. The arrows on each

side of the instrument cluster flash to show

proper operation.

NOTE:

If either light remains on and does not flash, or

there is a very fast flash rate, check for a defec

tive outside light bulb.

ANE

HANGE

SSIST

— I

QUIPPED

Lightly push the multifunction lever up or down,

without moving beyond the detent, and the turn

signal will flash three times then automatically

turn off.

21_DT_OM_EN_USC_t.book Page 55

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands