RAM 1500 2WD 2021 Owner'S Manual Download Page 42

Page: 42 / 496

GETTING TO KNOW YOUR VEHICLE

EAD

ESTRAINTS

Head restraints are designed to reduce the risk

of injury by restricting head movement in the

event of a rear impact. Head restraints should

be adjusted so that the top of the head restraint

is located above the top of your ear.

NOTE:

Do not reverse the head restraints (making the

rear of the head restraint face forward) in an

attempt to gain additional clearance to the back

of your head.

Front Head Restraints

Your vehicle is equipped with front four-way

driver and passenger head restraints.
To raise the head restraint, pull upward on the

head restraint. To lower the head restraint,

push the adjustment button, located at the

base of the head restraint, and push downward

on the head restraint.

NOTE:

The head restraints should only be removed by

qualified technicians, for service purposes only.

If either of the head restraints require removal,

see an authorized dealer.

Head Restraint Adjustment Button Location

To adjust the head restraint forward, pull the

top of the head restraint toward the front of the

vehicle as desired and release. To adjust the

head restraint rearward, pull the top of the head

restraint to the forward most position and

release. The head restraint will return to the

rear most position.

Forward Adjustment

NOTE:

If your vehicle is equipped with a front bench

seat, the center head restraint is not adjustable

or removable.

WARNING!



All occupants, including the driver, should

not operate a vehicle or sit in a vehicle’s

seat until the head restraints are placed in

their proper positions in order to minimize

the risk of neck injury in the event of a

crash.



Head restraints should never be adjusted

while the vehicle is in motion. Driving a

vehicle with the head restraints improperly

adjusted or removed could cause serious

injury or death in the event of a collision.

21_DT_OM_EN_USC_t.book Page 40

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands