RAM 1500 2WD 2021 Owner'S Manual Download Page 239

Page: 239 / 496

MULTIMEDIA

237

UCONNECT SETTINGS

The Uconnect system uses a combination of

buttons on the touchscreen and buttons on the

faceplate located on the center of the

instrument panel. These buttons allow you to

access and change the Customer

Programmable Features. Many features can

vary by vehicle.
Buttons on the faceplate are located below

and/or beside the Uconnect system in the

center of the instrument panel. In addition,

there is a Scroll/Enter control knob located on

the right side. Turn the control knob to scroll

through menus and change settings. Push the

center of the control knob one or more times to

select or change a setting.
Your Uconnect system may also have Screen

Off and Mute buttons on the faceplate.
Push the Screen Off button on the faceplate to

turn off the Uconnect screen. Push the button

again or tap the screen to turn the screen on.
Press the Back Arrow button to exit out of a

Menu or certain option on the Uconnect system.

USTOMER

ROGRAMMABLE

EATURES

Uconnect 4C NAV With 12-inch Display Touchscreen

And Faceplate Buttons

For the Uconnect 3 With 5-inch Display, the

Uconnect 4/4C NAV With 8.4-inch Display, and

Uconnect 4C NAV With 12-inch Display

Press the Apps button, then press the

Settings button on the touchscreen to display

the menu setting screen. In this mode the

Uconnect system allows you to access

programmable features.

NOTE:



Depending on the vehicle’s options, feature

settings may vary.



All settings should be changed with the igni

tion in the ON/RUN position.

When making a selection, only press one button

at a time to enter the desired menu. Once in the

desired menu, press and release the preferred

setting “option” until a check mark appears

next to the setting, showing that setting has

been selected. Once the setting is complete,

press the X button on the touchscreen to close

out of the settings screen. Pressing the Up or

Down Arrow button on the right side of the

screen will allow you to toggle up or down

through the available settings.

1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate

21_DT_OM_EN_USC_t.book Page 237

Summary of Contents for 1500 2WD 2021

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands

RAM 1500 2WD 2021, Owner'S Manual

Search results

Summary of Contents for 1500 2WD 2021

Reviews:

Related manuals for 1500 2WD 2021

Brands by name

Popular brands