manualshive.com logo in svg

Radware Alteon, Application Manual, Page: 811 / 842

Share
Download
Radware Alteon Application Manual Download Page 811

 

Alteon Application Switch Operating System Application Guide

Content-Intelligent Server Load Balancing Not Using Layer 7 Content 

Document ID: RDWR-ALOS-V2900_AG1302

 

811

2. Define the strings to be used for URL load balancing.

—

addstr—Add string or a pattern.

—

remstr—Remove string or a pattern.

A default string any indicates that the particular server can handle all URL or cache requests. 
Refer to the following examples:

•

Example 1: String with the Forward Slash (/), page 811

•

Example 2: String without the Forward Slash (/), page 811

•

Example 3: String with the Forward Slash (/) Only, page 811

Example 

1: 

String with the Forward Slash (/)

A string that starts with a forward slash (/), such as "

/images

," indicates that the server processes 

requests that start out with the "

/images

" string only.

The 

/images 

string allows the server to process these requests:

•

/images/product/b.gif

•

/images/company/a.gif

•

/images/testing/c.jpg

This string would not allow the server to process these requests, however:

•

/company/images/b.gif

•

/product/images/c.gif

•

/testing/images/a.gif

Example 

2: String without the Forward Slash (/)

A string that does not start with a forward slash (

/

) indicates that the server will process any 

requests that contain the defined string. 
The 

images

 string allows the server to process these requests:

•

/images/product/b.gif

•

/images/company/a.gif

•

/images/testing/c.jpg

•

/company/images/b.gif

•

/product/images/c.gif

•

/testing/images/a.gif

Example 

3: String with the Forward Slash (/) Only

If a server is configured with the load balance string (/) only, it will only handle requests to the root 
directory. 
The server would process any request to items in the root directory such as the following:

•

/

•

/index.htm

•

/default.asp

>> # /cfg/slb/layer7/slb/addstr | remstr <l7lkup | pattern>

Summary of Contents for Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments