manualshive.com logo in svg

Radware Alteon, Application Manual, Page: 179 / 842

Share
Download
Radware Alteon Application Manual Download Page 179

 

Alteon Application Switch Operating System Application Guide

Server Load Balancing

Document ID: RDWR-ALOS-V2900_AG1302

 

179

To view the current buddy server settings for a real server

To configure buddy server health checking

1. Configure an interface.

2. Enable SLB

3. Enable ports for SLB.

4. Configure and enable real servers.

5. Configure real server groups and assign real servers to them.

6. Apply and save the configuration

7. Configure virtual servers and enable HTTP service.

>> Main# /cfg/slb/real <real server number> /adv/buddyhc/cur

>>Main# /cfg/l3/if 1/addr 10.1.11.1/mask 255.255.255.0/ena

>>Main# /cfg/slb/on

>> Main# /cfg/slb/port 2/server en

>> Main# /cfg/slb/port 3/server en

>> Main# /cfg/slb/port 4/server en

>> Main# /cfg/slb/port 5/server en

>> Main# /cfg/slb/port 6/server en

>> Main# /cfg/slb/real 1/rip 10.1.11.30/ena

>> Main# /cfg/slb/real 2/rip 10.1.11.31/ena

>> Main# /cfg/slb/real 3/rip 10.1.11.32/ena

>> Main# /cfg/slb/real 4/rip 10.1.11.33/ena

>> Main# /cfg/slb/real 5/rip 10.1.11.34/ena

>> Main# /cfg/slb/group 2/add 2

>> Main# /cfg/slb/group 2/add 3

>> Main# /cfg/slb/group 2/add 4

>> Main# /cfg/slb/group 2/add 5

>> Main# /cfg/slb/group 2/health tcp

>> Main# Apply

>> Main# Save

Summary of Contents for Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments