manualshive.com logo in svg

Radware Alteon, Application Manual

Share
Download
Radware Alteon Application Manual Download Page 598

Alteon Application Switch Operating System Application Guide

 

Persistence

598

 Document 

ID: 

RDWR-ALOS-V2900_AG1302

For information on how to configure your network for SLB, see 

Server Load Balancing, page 165

.

2. If a proxy IP address is not configured on the client port, enable DAM for real servers.

3. Select session ID-based persistence as the persistent binding option for the virtual port.

4. Enable client processing on the client port.

Windows Terminal Server Load Balancing and Persistence

Windows Terminal Services refers to a set of technologies that allow Windows users to run Windows-
based applications remotely on a computer running as the Windows Terminal Server. Alteon includes 
load balancing and persistence options designed specifically for Windows Terminal Services.
In a load-balanced environment, a group of terminal servers have incoming session connections 
distributed in a balanced manner across the servers in the group. The Windows session director is 
used to keep a list of sessions indexed by username. This allows a user to reconnect to a 
disconnected user session.
The session director provides functionality that allows a group of terminal servers to coordinate the 
reconnection of disconnected sessions. The session director is updated and queried by the terminal 
servers whenever users log on, log off, or disconnect their sessions while leaving their applications 
active.
The client can be reconnected to the terminal server where the user's disconnected session resides 
using the routing token information. The session director passes the routing token information to 
the client with the correct server IP address embedded. The client presents this routing token to the 
load balancer when it reconnects to the virtual IP address. The load balancer deciphers the token 
and sends the client to the correct terminal server.
In some instances, a dedicated session director may not exist. If this is the case, enable the 
userhash functionality to perform the terminal server binding operation based on user name 
hashing.
By default, Windows Terminal Server traffic uses TCP port 3389 but it can configured to work on any 
non-standard port.
For further information regarding Windows Terminal Services, refer to the Microsoft Web site.

Figure 97 -  Windows Terminal Server Load Balancing Network Topology, page 599

 illustrates a 

sample Windows Terminal Server Load Balancing network topology:

>> # /cfg/slb/adv/direct ena

>> # /cfg/slb/virt <virtual server number> /service <virtual port> pbind sslid

>> # /cfg/slb/port <port number> /client ena

Summary of Contents for Alteon











































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands