RADIOEAR AP70, Instructions For Use Manual

Page: 13 / 150

AP70 Instructions for Use - English
Date: 2020/03 Page 7/14
3. Operation Instruction
3.1 Connection Panel Directory
3.2 AP70 - Connection Panel Dictionary
Position: Symbol: Function:
1 Out Plug for speaker CH1
2 Out Plug for speaker CH2
3 In Plug for input signal CH1
4 In Plug for input signal CH 2
5 Pre-set Input sensitivity adjustment for CH1
6 Pre-set Input sensitivity adjustment for CH 2
7 Remote Input
8 Remote Remote power on Controlled / Normal mode
9 Power Plug for Remote power on
10 Ground terminal for setup calibration
Input Level
The input sensitivity for CH1 and CH2 are controlled by the buttons (5) and (6) “Preset” on the connection panel. Do
not adjust the buttons (5) and (6) when the system is calibrated.
Remote power on
The amplifier can be switched on and off remotely. In the position “Normal mode” (8) can only be switched on and off
by the Main switch (10). In the position “Remote controlled” the amplifier can be turned on by applying 5VDC at the
Remote plug (9), 0VDC will turn of the amplifier.
3.3 AP70 - Operation Panel Dictionary
Position: Symbol: Function:
10 Power Mains power switch
11 Overload / Over temperature indicator
12 Power Power indicator