IQ3 Street Logger Dash Installation Manual
54
Now you should be able to see the data files that were recorded by your IQ3 Street Logger Dash. The first
file recorded would be named 1.ddf, the second 2.ddf, the third 3.ddf and so on. If you would like to see
the time and date the data files were created, you will need to
click on the details icon in the
upper corner.
The time and date will now be shown. However, they typically cannot be seen because they are off to the
right of the screen. To fix this, you will need to drag the window larger by placing the mouse over the lower
right corner. Now using left mouse button, click and drag the window larger.
After you have identified the data file you would like to upload, select the file by clicking on it with
the left mouse button, and then click on the Open button in the lower right corner.
Naming and Storing the Uploaded Data
After the data has been uploaded from the memory card, a dialog box will be displayed to allow
you to enter the session information. Enter the appropriate year and track by selecting the correct
value from the selection lists. If the desired year and/or track is not on the corresponding
selection list, enter the new year or track, by typing the name directly into the top selection box.
The new year, and/or track will be added to the selection list. Select the
race type, and race sequence information by clicking on the desired radio button. The system will
enter the date and time.