IQ3 Street Logger Dash Installation Manual
52
Setting the Record Length
Locate the Max Number of Seconds to Record option, and select it as described above. The options edit box
will now display the currently programmed number of seconds to record. Enter the new desired value in
the edit box.
Sending the Record Parameters to Your Data Logger
The final step in programming the record parameters on your data logger is to send the
configuration just edited from your PC to your data logger over the USB communication cable
connected above. To send the information click, on the Send Configuration button located in the
lower left-hand section of the logger dialog box. A progress box will be displayed showing the
information being transferred to your data logger. When completed, the last line in the progress
box should read Devices Programmed Successfully.
You have completed the programming of your data logger. The new programming will become
effective the next time you turn your data logger on.