IQ3 Street Logger Dash Installation Manual
13
Installation
The design of the IQ3 Street Logger Dash kit greatly simplifies the installation process, as there is no
external data logger or related components necessary. However, there are basic guidelines that
must be followed in order to ensure correct operation of the product.
General Mounting Requirements
The IQ3 Street Logger Dash is designed to be utilized in a typical street car environment and is
designed as such. However, there are external conditions that can influence the operation and
longevity of the product and associated wiring.
Heat
Avoid excessive heat, such as generated from exhaust systems, transmissions, etc.
Electrical Interference
Avoid electrical interference. Vehicles generate electrical interference from a variety of locations
such as ignitions, alternators, ECU, spark plugs, coils and radio/GPS/telemetry antennas. This
interference can affect the signals generated by any or all of the sensors that relay information back
to the dash.
Moisture
Avoid excessive moisture. The IQ3 Street Logger Dash is designed to be water resistant but not
waterproof. This means when installed in open cockpit type of vehicles (such as, convertibles) it is
safe for use in light rain but not designed to be subject to immersion of water. Excessive water
buildup can enter dash and damage the unit.
Cleaning
Clean glass lens initially with a lint-free, non-abrasive (microfiber type) cloth. Do not apply too much
pressure to the screen. If using a cleaning solution, DO NOT use an all-purpose cleaner with
acetone, ammonia-based or alcohol, since they can take off the dash’s protective coating. 100%
distilled water and/or 50%/50% distilled water and white vinegar is best. Heavy dust and dirt can be
blown away by using small cans of compressed air made for cleaning camera and computer
equipment.
Mounting Orientation of IQ3 Street Logger Dash
It is important to insure the IQ3 cannot become dislodged during use. Three #10 studs are provided
in order to provide secure mounting. If desired, the studs can be unscrewed from the threaded
inserts located in the dash housing.
Perpendicular to
travel
Direction of
travel