IQ3 Street Logger Dash Installation Manual
53
Uploading Recorded Data to your PC from the IQ3 Street Logger Dash
Data from your IQ3 Street Logger Dash data logger can be uploaded to your PC for data viewing and
analysis using the RacePak DataLink II program. Follow the instructions below to upload data from
the SD memory card to your PC.
Remove the SD memory card from the IQ3 Street Logger Dash data logger and place it in the SD
memory card reader connected to you PC.
Next, click the
New Upload icon at the top of the left toolbar.
Select the configuration file named IQ3_Street_Config and click OK.
The first time you attempt to upload data you will need to select the memory card reader drive.
To do this click on the drop down box labeled Look in: and then click on the drive labeled
RACEPAK_SD as shown in the picture below.