3156B User Manual
Racal Instrument © 2005
Configuring The Instrument 2-1
Chapter 2
CONFIGURING the INSTRUMENT
Installation
Overview
This chapter contains information and instructions necessary to
prepare the Model 3156B for operation. Details are provided for initial
inspection, grounding safety requirements, repackaging instructions
for storage or shipment, logical address selection and installation
information.
Unpacking and
Initial Inspection
Unpacking and handling of the generator requires normal precautions
and procedures applicable to handling of sensitive electronic
equipment. The contents of all shipping containers should be checked
for included accessories and certified against the packing slip to
determine that the shipment is complete.
Safety
Precautions
The following safety precautions should be observed before using this
product and associated computer. Although some instruments and
accessories would normally be used with non-hazardous voltages,
there are situations where hazardous conditions may be present.
This product is intended for use by qualified persons who recognize
shock hazards and are familiar with the safety precautions required to
avoid possible injury. Read the operating information carefully before
using the product.
Exercise extreme caution when a shock hazard is present. Lethal
voltage may be present on cables, connector jacks, or test fixtures.
The American National Standard Institute (ANSI) states that a shock
hazard exists when voltage levels greater than 30V RMS, 42.4V peak
or 60 VDC are present.