1269 User Manual
Maintenance 7-9
Removal and
Replacement of The
AC Mains Fuse
Complete the steps below while referring to
Figure 7-5
WARNING
To avoid electrical shock, the AC mains power
input must be disconnected before replacement of
the fuse.
Figure 7-5, Removing and Replacing The AC Mains Fuse
1.
Ensure AC mains input (J400) is disconnected.
2.
Insert flat blade screwdriver into fuse carrier slot at
F400 in power supply rear panel and rotate counter
clockwise to remove.
3.
To replace fuse, insert the fuse carrier and fuse
assembly into fuse housing opening for F400 on power
supply.
4.
Insert flat blade screwdriver into fuse carrier and rotate
clockwise to lock fuse assembly in place.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com