1269 User Manual
Configuring The 1269 2-5
hook to rest on the cardguide (3).
6.
With a slotted screwdriver or similar flat-bladed tool,
depress the spring hook (4) at a slight downward angle,
applying light pressure at the front end. This will cause
the
snap-hook to firmly seat the director into place.
7.
To remove the airflow director, depress the snap-in hook
(4) from the front with a flat-bladed tool. This will unlatch
the hook and allow removal from the cardguide at the
front end.
8.
Pull forward to release the fixed hooks at the center and
rear.
Installing Blanking
Panels
In order to optimize module cooling performance, install
optional blanking panels (P/N 404836) into unused or C-
size empty slots. Secure with two captive mounting
screws. Refer to
Figure 2-3
.
Figure 2-3 Blanking Panels
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
