Quidway WB2011, User Manual

Page: 100 / 157

Command Line Interface
6-20
6
sntp-server ip
This command sets the IP address of the servers to which SNTP time requests are
issued. Use the this command with no arguments to clear all time servers from the
current list.
Syntax
sntp-server ip < 1 | 2 > < ip>
• 1 - First time server.
• 2 - Second time server.
• ip - IP address of an time server (NTP or SNTP).
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
Command Usage
When SNTP client mode is enabled using the sntp-server enable command,
the sntp-server ip command specifies the time servers from which the
wireless bridge polls for time updates. The wireless bridge will poll the time
servers in the order specified until a response is received.
Example
Related Commands
sntp-server enable (6-20)
show sntp (6-22)
sntp-server enable
This command enables SNTP client requests for time synchronization with NTP or
SNTP time servers specified by the
sntp-server ip command. Use the no form to
disable SNTP client requests.
Syntax
sntp-server enable
no sntp-server enable
Default Setting
Disabled
Command Mode
Global Configuration
Outdoor Bridge(config)#sntp-server ip 10.1.0.19
Outdoor Bridge#