Quidway WB2011, User Manual

Page: 32 / 157

Hardware Installation
3-4
3
2. Position the bracket in the intended location and mark the position of the three
mounting screw holes.
3. Drill three holes in the wall that match the screws and wall plugs included in the
bracket kit, then secure the bracket to the wall.
4. Use the included nuts to tightly secure the wireless bridge to the bracket.
Connect the External Antenna
If deploying a
WB2011
Master bridge unit in a point-to-multipoint configuration,
you need to mount the external antenna and connect it to the bridge. Perform these
steps:
1. Mount the external antenna to the same supporting structure as the bridge,
within 3 m (10 ft) distance, using the bracket supplied in the antenna package.
2. Connect the antenna to the bridge’s N-type connector using the provided RF
coaxial cable.
3. Apply weatherproofing tape (not included) to the antenna connectors to help
prevent water entering the connectors.
Coaxial Cable
N-type
Connector
External
Omnidirectional
Antenna