Quidway WB2011, User Manual

Page: 136 / 157

Command Line Interface
6-56
6
Example
transmit-power
This command adjusts the power of the radio signals transmitted from the wireless
bridge.
Syntax
transmit-power < signal-strength>
signal-strength - Signal strength transmitted from the wireless bridge.
(Options: full, half, quarter, eighth, min)
Actual transmit power depends on the antenna, radio channel, and
transmit data rate. See “Antenna Specifications” on page B-3 for details on
maximum output power for specific antennas. The maximum transmit
power may also be lowered by local regulatory limits.
Default Setting
full
Command Mode
Interface Configuration (Wireless)
Command Usage
• The “min” keyword indicates minimum power (6.25% of maximum).
• The longer the transmission distance, the higher the transmission power
required. Power selection is not just a trade off between coverage area and
maximum data rates. You also have to ensure that high strength signals do
not interfere with the operation of other radio devices in your area.
Example
shutdown
This command disables the wireless interface. Use the no form to restart the
interface.
Syntax
shutdown
no shutdown
Default Setting
Interface enabled
Command Mode
Interface Configuration (Wireless)
Outdoor Bridge(if-wireless a)#transmit-key 2
Outdoor Bridge(if-wireless a)#
Outdoor Bridge(if-wireless a)#transmit-power half
Outdoor Bridge(if-wireless a)#