Quidway WB2011, User Manual

Page: 46 / 157

System Configuration
5-2
5
System Identification
The system information parameters for the wireless bridge can be left at their default
settings. However, modifying these parameters can help you to more easily
distinguish different devices in your network.
Filter Control Enables VLAN support and filters traffic matching specific Ethernet
protocol types
5-6
SNMP Controls access to this wireless bridge from management stations
using SNMP, as well as the hosts that will receive trap messages
5-7
Administration Configures user name and password for management access;
upgrades software from local file, FTP or TFTP server; resets
configuration settings to factory defaults; and resets the wireless
bridge
5-10
System Log Controls logging of error messages; sets the system clock via SNTP
server or manual configuration
5-13
WDS Sets the MAC addresses of other units in the wireless bridge network 5-17
Bridge Sets the time for aging out entries in the bridge MAC address table 5-18
STP Configures Spanning Tree Protocol parameters 5-21
Radio Interface A Configures the IEEE 802.11a interface 5-25
Radio Settings Configures radio signal parameters, such as radio channel,
transmission rate, and beacon settings
5-25
Security Configures data encryption using Wired Equivalent Protection (WEP)
or Advanced Encryption Standard (AES)
5-28
Menu Description Page