Quidway WB2011, User Manual

Page: 78 / 157

System Configuration
5-34
5
• IP Default Gateway: IP address of the gateway router between this device and
management stations that exist on other network segments.
• HTTP Server: Shows if management access via HTTP is enabled.
• HTTP Server Port: Shows the TCP port used by the HTTP interface.
• Version: Shows the version number for the runtime code.
AP Wireless Configuration – The AP Wireless Configuration table displays the
wireless interface settings listed below. Note that Radio A refers to the 802.11a
interface.
• Radio Channel: The radio channel currently used on the wireless bridge.
• Radio Encryption: The key size used for data encryption.
• Radio Authentication Type: Shows the bridge is set as an open system.
CLI Commands for Displaying System Settings – To view the current wireless bridge
system settings, use the
show system
command from the Exec mode. To view the
current radio interface settings, use the
show interface wireless a
command (see
page 6-57).
Outdoor Bridge#show system 6-15
System Information
==========================================================
Serial Number : 0000000001
System Up time : 0 days, 0 hours, 15 minutes, 30 seconds
System Name : Outdoor Bridge
System Location :
System Contact : Contact
System Country Code : US - UNITED STATES
MAC Address : 00-0D-3B-10-01-84
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
VLAN State : DISABLED
Native VLAN ID : 1
DHCP Client : ENABLED
HTTP Server : ENABLED
HTTP Server Port : 80
Software Version : v1.1.1.0
==========================================================
Outdoor Bridge#