Quidway WB2011, User Manual

Page: 89 / 157

General Commands
6-9
6
reset
This command restarts the system or restores the factory default settings.
Syntax
reset < board | configuration >
• board - Reboots the system.
• configuration - Resets the configuration settings to the factory defaults,
and then reboots the system.
Default Setting
None
Command Mode
Exec
Command Usage
When the system is restarted, it will always run the Power-On Self-Test.
Example
This example shows how to reset the system:
show history
This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Exec
Command Usage
• The history buffer size is fixed at 10 commands.
• Use the up or down arrow keys to scroll through the commands in the
history buffer.
Example
In this example, the show history command lists the contents of the command
history buffer:
Outdoor Bridge#reset board
Reboot system now? <y/n>: y
Outdoor Bridge#show history
config
exit
show history
Outdoor Bridge#