Quidway WB2011, User Manual

Page: 109 / 157

Flash/File Commands
6-29
6
Example
The following example shows how to upload the configuration settings to a file on
the TFTP server:
The following example shows how to download a configuration file:
delete
This command deletes a file or image.
Syntax
delete filename
filename - Name of the configuration file or image name.
Default Setting
None
Command Mode
Exec
Caution: Beware of deleting application images from flash memory. At least one
application image is required in order to boot the wireless bridge. If there are
multiple image files in flash memory, and the one used to boot the wireless
bridge is deleted, be sure you first use the
bootfile command to update the
application image file booted at startup before you reboot the wireless bridge.
Example
This example shows how to delete the test.cfg configuration file from flash memory.
Related Commands
bootfile (6-27)
dir (6-30)
Outdoor Bridge#copy config tftp
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
Outdoor Bridge#
Outdoor Bridge#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:2
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
Outdoor Bridge#
Outdoor Bridge#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
Outdoor Bridge#