manualshive.com logo in svg

Quectel UG Series, Command Manual

The Quectel UG Series is a cutting-edge product designed to meet your communication needs. Enhance your experience by downloading the Command Manual from our website; this manual provides comprehensive instructions, ensuring seamless integration. Get your free download today and unlock the full potential of the Quectel UG Series.

Share
Download
background image

                                                                                                                                             

UMTS/HSPA  Module  Series 

                                                                                                              WCDMA  UGxx  AT  Commands  Manual

 

 

WCDMA_UGxx_AT_Commands_Manual                      Confidential / Released                          133 / 247 
 
 

 

 

Parameter

 

<mode>         

0

         

  Buffer unsolicited result codes in the TA. If TA result code buffer is full, indications 

can be buffered in some other place or the oldest indications may be discarded 

and replaced with the new received indications 

                          1           Discard  indication  and  reject  new  received  message  unsolicited  result  codes 

when TA-TE link is reserved (e.g. in on-line data mode). Otherwise forward them 

directly to the TE 

                          2            Buffer  unsolicited  result  codes  in  the  TA  when  TA-TE  link  is  reserved  (e.g.  in 

on-line data mode) and flush them to the TE after reservation. Otherwise forward 

them directly to the TE 

<mt>   

            The  rules  for  storing  received  SMs  depend  on  its  data  coding  scheme  (refer  to  3G

PPTS  23.038),  and  preferred  memory  storage  (+CPMS)  setting;  and  the  value  is:

 

                          0   

No SMS-DELIVER indications are routed to the TE 

1 

If SMS-DELIVER is stored into ME/TA, indication of the memory location is routed 

to the TE by using unsolicited result code: 

+CMTI: <mem>,<index> 

2 

SMS-DELIVERs  (except  class  2)  are  routed  directly  to  the  TE  using  unsolicited 

result  code: 

+CMT:  [<alpha>],<length><CR><LF><pdu>

  (PDU  mode  enabled) 

or 

+CMT:<oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>, 

<length>]<CR><LF><data> 

(Text  mode  enabled;  about  parameters  in  italics, 

refer  to  Command  Show  Text  Mode  Parameters 

+CSDH

).  Class  2  messages 

result in indication as defined in 

<mt>

=1 

3 

Class  3  SMS-DELIVERs  are  routed  directly  to  TE  by  using  unsolicited  result 

codes  defined  in 

<mt>

=2.  Messages  of  other  classes  result  in  indication  as 

defined in 

<mt>

=1 

<bm>       

      The  rules  for  storing  received  CBMs  depend  on  its  data  coding  scheme  (refer  to  3

GPP  TS  23.038),  and  the  setting  of  Select  CBM  Types  (

+CSCB

);  and  the  value  is: 

                          0          No CBM indications are routed to the TE 

                          1            If CBM is stored into ME/TA, indication of the memory location is routed to the TE 

using unsolicited result code: 

+CBMI: <mem>,<index> 

2            New CBMs are routed directly to the TE using unsolicited result code: 

+CBM: <length><CR><LF><pdu> 

(PDU mode)

 

+CBM: <sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data> 

(text mode)

 

                          3            Class 3 CBMs are routed directly to TE using unsolicited result codes defined in 

<bm>

=2.  If  CBM  storage  is  supported,  messages  of  other  classes  result  in 

indication as defined in 

<bm>

=1. 

<ds> 

       

 

0            No  SMS-STATUS-REPORTs  are  routed  to  the  TE 

                          1            SMS-STATUS-REPORTs  are  routed  to  the  TE  using  unsolicited  result  code: 

 

 

 

 

 

+CDS: <length><CR><LF><pdu> (PDU mode) 

 

 

 

 

 

+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,,<st> (text mode) 

                          2            If  SMS-STATUS-REPORT  is  stored  into  ME/TA,  indication  of  the  memory   

 

 

 

location  is  routed  to  the  TE  using  unsolicited  result  code:   

 

 

 

 

 

+CDSI:<mem>,<index> 

Quectel 

Confidential

Summary of Contents for UG Series

























































































































































































































































Reviews:

No comments

Related manuals for UG Series

Baccara G75-DFC Installation Operation & Maintenance preview
G75-DFC
Brand: Baccara Pages: 16
CAME TWIN Maintenance Instructions Manual preview
TWIN
Brand: CAME Pages: 98
CAME ZL19N Installation Manual preview
ZL19N
Brand: CAME Pages: 16
CAME RIOED8WS Instructions Manual preview
RIOED8WS
Brand: CAME Pages: 8
Salda FLEX Service Manual preview
FLEX
Brand: Salda Pages: 20
Oldham MX15 Installation And Operating Manual preview
MX15
Brand: Oldham Pages: 32
H3C PSR3000-54A Manual preview
PSR3000-54A
Brand: H3C Pages: 14
Paradox Grafica DNE-K07 Reference And Installation Manual preview
Grafica DNE-K07
Brand: Paradox Pages: 24
Panosol SR658 Operation Manuals preview
SR658
Brand: Panosol Pages: 105
Pangolin FB4 Series Quick Start Manual preview
FB4 Series
Brand: Pangolin Pages: 8
OPW PetroVend PV200 Options Installation preview
PetroVend PV200
Brand: OPW Pages: 2
Fairford Synergy SGY-101 Quick Start Manual preview
Synergy SGY-101
Brand: Fairford Pages: 20
Varian 969-9507 Instruction Manual preview
969-9507
Brand: Varian Pages: 37
Pestill PTPESTACREPA User Manual preview
PTPESTACREPA
Brand: Pestill Pages: 4
FEAM EFG10 Series Instructions For Use Manual preview
EFG10 Series
Brand: FEAM Pages: 14
APV SUPERSEAL 2014 Series Installation, Operation & Maintenance Manual preview
SUPERSEAL 2014 Series
Brand: APV Pages: 20
LEYBOLD SCROLLVAC plus Service Manual preview
SCROLLVAC plus
Brand: LEYBOLD Pages: 12
Nibe Uplink Installer Manual preview
Uplink
Brand: Nibe Pages: 20

Brands by name

Popular brands

Load more brands