manualshive.com logo in svg

Quectel UG Series, Command Manual

The Quectel UG Series is a cutting-edge product designed to meet your communication needs. Enhance your experience by downloading the Command Manual from our website; this manual provides comprehensive instructions, ensuring seamless integration. Get your free download today and unlock the full potential of the Quectel UG Series.

Share
Download
background image

                                                                                                                                             

UMTS/HSPA  Module  Series 

                                                                                                              WCDMA  UGxx  AT  Commands  Manual

 

 

WCDMA_UGxx_AT_Commands_Manual                      Confidential / Released                          124 / 247 
 
 

 

 

 

      2 

 

 

    "STO UNSENT" 

Stored unsent messages 

 

      3 

 

 

    "STO SENT" 

 

Stored sent messages 

 

      4 

 

            "ALL"   

         

All messages   

<alpha>

              String  type  alphanumeric  representation  of 

<da>

  or 

<oa>

  corresponding  to  the  entry 

found in MT phonebook; implementation of this feature is manufacturer specified; the 

used character set should be the one selected with command Select TE Character Set 

+CSCS (see definition of this command in 3GPP TS 27.007 ) 

<da>

       

Destination  address.  3GPP  TS  23.040  TP-Destination-Address  Address-Value  field  in 

string format; BCD numbers (or GSM 7 bit default alphabet characters) are converted to 

characters  of  the  currently  selected  TE  character  set  (refer  to  command 

+CSCS

  in 

3GPP TS 27.007 ); type of address is given by 

<toda>

 

<oa>

                  Originating  address.  3GPP  TS  23.040  TP-Originating-Address  Address-Value  field  in 

string format; BCD numbers (or GSM 7 bit default alphabet characters) are converted to 

characters of the currently selected TE character set (refer to command 

+CSCS

 in TS 

27.007); type of address is given by

 <tooa>

 

<scts> 

       

Service  center  time  stamp.  3GPP  TS  23.040  TP-Service-Centre-Time-Stamp  in 

time-string format (refer to 

<dt>

) 

<fo> 

                    First octet. Depending on the command or result code: First octet of 3GPP TS 23.040 

SMS-DELIVER, 

SMS-SUBMIT 

(default 

17), 

SMS-STATUS-REPORT, 

or 

SMS-COMMAND in integer format. If a valid value has been entered once, parameter 

can be omitted 

<pid> 

                 Protocol  identifier.  3GPP  TS  23.040  TP-Protocol-Identifier  in  integer  format  (default                             

0) 

<dcs>                 

Data  coding  scheme.  Depending  on  the  command  or  result  code:  3GPP  TS  23.038 

SMS  Data  Coding  Scheme  (default  0),  or  Cell  Broadcast  Data  Coding  Scheme  in 

integer format 

<vp>

           

Validity  period.  Depending  on  SMS-SUBMIT 

<fo>

  setting:  3GPP  TS  23.040 

TP-Validity-Period either in integer format or in time-string format (refer to 

<dt>

) 

<mn>

                    Message  number.  3GPP  TS  23.040  TP-Message-Number  in  integer  format

 

<mr>

                    Message reference. 3GPP TS 23.040 TP-Message-Reference in integer format 

<ra>

                      Recipient  address.  3GPP  TS  23.040  TP-Recipient-Address  Address-Value  field  in 

string  format;  BCD  numbers  (or  GSM  default  alphabet  characters)  are  converted  to 

characters  of  the  currently  selected  TE  character  set  (refer  to  command  AT+CSCS); 

type of address given by 

<tora>

 

<tora>

                  Type  of  recipient  address.  3GPP  TS  24.011  TP-Recipient-Address  Type-of-Address 

octet in integer format (default refer to 

<toda>

) 

<toda>

                 Type  of  recipient  address.  3GPP  TS  24.011  TP-Recipient-Address  Type-of-Address 

octet in integer format 

<tooa>

                 Type of originating address. 3GPP TS 24.011 TP-Originating-Address Type-of-Address 

octet in integer format (default refer to 

<toda>

) 

<sca>

                   Service center address. 3GPP TS 24.011 RP SC address Address-Value field in string 

format;  BCD  numbers  (or  GSM  7  bit  default  alphabet  characters)  are  converted  to 

characters  of  the  currently  selected  TE  character  set  (refer  to  command  +CSCS  in 

3GPP TS 27.007 ); type of address is given by 

<tosca>

 

Quectel 

Confidential

Summary of Contents for UG Series

























































































































































































































































Reviews:

No comments

Related manuals for UG Series

KAR-TECH MICRO Installation And Operation Manual preview
MICRO
Brand: KAR-TECH Pages: 28
2iB SC10 Quick Start Manual preview
SC10
Brand: 2iB Pages: 5
2gig Technologies Go!Control Panel Installation & Programming Manual preview
Go!Control Panel
Brand: 2gig Technologies Pages: 78
IBM 1620 Manual Of Instruction preview
1620
Brand: IBM Pages: 12
K&K M9700 Installation Instructions Manual preview
M9700
Brand: K&K Pages: 10
Garmin TR-1 Gold Installation Instructions preview
TR-1 Gold
Brand: Garmin Pages: 4
Samson 3354 Mounting And Operating Instructions preview
3354
Brand: Samson Pages: 40
GI.BI.DI AS05582 Installation Instructions Manual preview
AS05582
Brand: GI.BI.DI Pages: 60
Tormatic DuoControl Signal 111 Quick Start Manual preview
DuoControl Signal 111
Brand: Tormatic Pages: 3
Anthem MDX Crestron Manual preview
MDX Crestron
Brand: Anthem Pages: 8
National Instruments SET-1415 Technical Description preview
SET-1415
Brand: National Instruments Pages: 11
Adaptec ACB-2310 Installation Manual preview
ACB-2310
Brand: Adaptec Pages: 2
Webasto BlueHeat T91 Owner'S Manual preview
BlueHeat T91
Brand: Webasto Pages: 12
MELICONI CONTROL 4 Plus Instruction Booklet preview
CONTROL 4 Plus
Brand: MELICONI Pages: 6
Grundfos EC 15 Installation And Operating Instructions Manual preview
EC 15
Brand: Grundfos Pages: 80
UUGear Witty Pi 3 User Manual preview
Witty Pi 3
Brand: UUGear Pages: 38
GCE druva LINE 200 Operating Instructions Manual preview
druva LINE 200
Brand: GCE Pages: 13
Leviton 72A00-1 Installation Instructions And User Manual preview
72A00-1
Brand: Leviton Pages: 2

Brands by name

Popular brands

Load more brands