Quectel UG Series Command Manual Download Page 84

Page: 84 / 248

UMTS/HSPA Module Series

WCDMA UGxx AT Commands Manual

WCDMA_UGxx_AT_Commands_Manual Confidential / Released 83 / 247

Parameter

Example

AT+CTZR=2

AT+CTZR?

+CTZR: 2

+CTZE:

“+32”,0,“2013/08/23,06:51:13”

<reporting>

is 2

The configuration will be saved to NV automatically.

Reference

3GPP TS 27.007

<reporting>

Integer type, indicates the mode of time zone reporting

Disable time zone reporting of changed event

Enable time zone reporting of changed event by unsolicited result code

+CTZV: <tz>

Enable extended time zone reporting by unsolicited result code

+CTZE: <tz>,<dst>,<time>

<tz>

String type, represents the sum of the local time zone (difference between the local

time and GMT is expressed in quarters of an hour) plus daylight saving time. The

format is "±zz", expressed as a fixed width, two digit integer with the range -48 ... +56.

To maintain a fixed width, numbers in the range -9 ... +9 are expressed with a leading

zero, e.g. "-09", "+00" and "+09".

<dst>

Integer type, indicates whether

<tz>

includes daylight savings adjustment

<tz>

includes no adjustment for Daylight Saving Time

<tz>

in1 hour (equals 4 quarters in

<tz>

) adjustment for daylight saving

time

<tz>

in2 hours (equals 8 quarters in

<tz>

) adjustment for daylight saving

time

<time>

String type, represents the local time. The format is "YYYY/MM/DD,hh:mm:ss",

expressed as integers representing year (YYYY), month (MM), date (DD), hour (hh),

minute (mm) and second (ss). This parameter can be provided by the network when

delivering time zone information and will be presented in the unsolicited result code of

extended time zone reporting if provided by the network.

NOTE

Quectel

Confidential

Summary of Contents for UG Series

























































































































































































































































Search results

Summary of Contents for UG Series

Reviews:

Related manuals for UG Series

Brands by name

Popular brands

Quectel UG Series, Command Manual

Search results

Summary of Contents for UG Series

Reviews:

Related manuals for UG Series

Brands by name

Popular brands