M10 AT Commands Set
M10_ATC_V1.01
- 82 -
Response
OK
+CME ERROR: <err>
Write Command
AT+CCWE=[<m
ode>]
Parameter
<mode>
0
Disable call meter warning event
1
Enable call meter warning event
Unsolicited result codes supported:
+CCWV
Shortly before the ACM (Accumulated Call Meter)
maximum
value is reached, an unsolicited result code +CCWV will
be
Approximately when 5 seconds call time remains. It is
also issued when starting a call if less than 5 s call time
remains.
Parameters
Reference
GSM 07.07 [13]
Note
GSM 07.07 specifies 30 seconds, so Quectel deviate from the
specification.
3.2.57 AT+CBC Battery Charge
AT+CBC Battery Charge
Response
+CBC:
(list of supported <
bcs
>s),(list of supported <
bcl
>s),(
voltage
)
OK
Test Command
AT+CBC=?
Parameters
see Execution Command
Response
+CBC: < bcs >, < bcl >,<voltage>
OK
+CME ERROR: <err>
Execution
Command
AT+CBC
Parameters
<bcs>
charge
status
0
ME is not charging
1
ME is charging
2
Charging has finished
<bcl>
battery
connection
level
1...100
battery has 1-100 percent of capacity remaining
vent
<voltage>
battery voltage(mV)
Quectel