PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
2.19 Jumper
As last step before the connection of the Raspberry Pi with the PiXtend the Jumpers are
getting set.
To the pin headers / jumpers on the PiXtend we want to give you the most important
information:
But in the following the pin headers are placed
–
Jumper "SPI_EN":
→
T
he most important jumper!
For standard operation this one has to be placed
all time. Without this jumper the Raspberry and the PiXtend can't communicate.
–
Jumper next to RS485- or CAN-clamps with the labeling „ON OFF“:
→ The position of this jumper will be important when the interfaces are getting
used. More information you can find in the datasheet of PiXtend. For now set the
jumper to the position “OFF”.
–
Jumper „DO-PWM“ near DO4 and DO5:
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
69 / 75
Figure 76: Jumper "SPI_EN"
