PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
2.12 Voltage regulator and cooling element
The voltage regulator is mounted together with the cooling element. In this process will be
applied heat-conducting paste too. The following pictures show the montage.
The connection wires are getting bend at 90° near the housing with the plat pliers.
The completely bent component shows Figure 62.
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
56 / 75
Figure 61: Bending the connection wires
Figure 62: Connection wires bent
