PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
The two potentiometer are getting put in the board and soldered at one point. So the
components can be fixed again if necessary. The other pin of the potentiometers can
afterwards be soldered easily on the bottom side.
The spacers are getting removed again and put aside through the final assembly.
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
37 / 75
Figure 32: Placement of the Potentiometers
Figure 33: PiXtend – Resistors and potentiometers mounted
