PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
Even if the electrolyte capacitors partially hold alone, the position should be checked after
soldering the first pin.
The electrolyte capacitors 1000 uF / 35V (C9) is mounted lying. The connection wires have
to be bend closely to the component, how it's shown in figure 47.
Please here too take care of the polarity.
Additional to the marking of the plus pole on
the printing of circuit board, there is a white stripe printed on the board which is marking
the minus pole:
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
46 / 75
Figure 47: Preparation of the
Electrolyte capacitor C9
Figure 48: Electrolyte capacitors C9 mounted