PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
2.11 Ferrite / Inductance
One connection wire of the Ferrite must be bent and then mounted how it is shown in
Figure 58.The first pin can be soldered and fixed from above, same as the resistors.
The coil can have different construction forms, that's why there are different drills for the
different grid dimensions. It only must be soldered this pads which through which your
component fits best.
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
54 / 75
Figure 58: Montage of the Ferrite
Figure 59: Assembly of the coil