PiXtend
Construction manual:
PiXtend V1.3 Full
Kit Assembly
On the following sides the single steps will be shown in this order, illustrated by many
pictures and tips.
The order of the placement-, assembly- and soldering steps has no technical relevance.
But we assembled some of the PiXtend- boards manually and think that the shown order is
well-suited.
Sure you can use your own order as well.
However we recommend to insert the lithium battery towards the end. So it can be avoided
that the battery gets a short. A short circuit can damage the battery and the board!
All components are getting placed on the top side of the PiXtend-
board and soldered on the bottom side.
The top side can be recognized at the white printing.
For fast and failure free work we recommended to print the placement plan and the part list
or to open it on the laptop / tablet next to the soldering place. Especially at resistors and
capacitors it is helpful to use the digital version of the plans and lists, because in PDFs it is
possible to search for components.
Part list and placement plan you can find in our download area:
http://www.pixtend.de/downloads/
www.pixtend.de
Copyright by Qube Solutions UG (limited liability)
21 / 75
