Quantum TC2201E, User Manual

Page: 40 / 202

Chapter 2 Getting Started
Interfaces and Connections
20 Quantum TC2201E User’s Guide
Figure 16 High
Density SCSI Cables
Warning:
During attachment of high density SCSI cables, please
note the orientation (as shown in Figure 2-11) of the high
density SCSI port connectors on the back panel of
TC2201E. Failure to maintain appropriate orientation of
the cables to the SCSI port connectors can result in damage
to the SCSI port connectors on the TC2201E.
Caution:
Do not plug HVD devices to an LVD/SE bus. Failure to
heed this caution may result in severe damage to
equipment.
Caution:
SCSI ports on the TC2201E are not hot-pluggable. Power
off the TC2201E whenever connecting/disconnecting the
SCSI cables.
Any SCSI cables used with the TC2201E series product must meet SCSI 2
standards and must be LVD rated (specifically low noise cabling). The
cables should be rated at 24 Ohm impedance and should have a VHDCI
68pin.8mm D-shell/P-type to Standard 68pin SCSI D-shell connector at the