Quantum TC2201E, User Manual

Page: 63 / 202

Chapter 3 Quantum Visual Manager
Main Menu
Quantum TC2201E User’s Guide 43
To use iSNS, enable the TC2201E as a client and then enter a DNS name
or IP address for up to three iSNS servers. To make changes or to
discontinue communication with a server, change or clear the
identification field(s), select the
Submit
button, and then reboot the
TC2201E to activate changes.
•
iSNS Client
can be toggled between Enabled and Disabled. The
default setting is Disabled. When enabled, the TC2201E will function
as an iSNS client and will initiate transactions with iSNS servers
using the iSNS Protocol. The iSNS client is a process that is co-
resident in the TC2201E, and which can register device attribute
information with the iSNS server. The capability is used for
automated device discovery.
•
Server 1, Server 2, and Server 3
can be set up by entering a DNS name
or IP address into the field for iSNS Server and entering the server
TCP Port into the field TCP Port. The standard value for TCP Port is
3205.