Quantum TC2201E, User Manual

Page: 73 / 202

Chapter 3 Quantum Visual Manager
Main Menu
Quantum TC2201E User’s Guide 53
Figure 35 Ethernet
Overrides Settings
Page
To finalize any changes for the override settings, select the Submit button
on the Ethernet Override Settings page.
•
Current MAC address
is the current Media Access Control (MAC)
address configured for the TC2201E. The MAC address is a hardware
address that uniquely identifies each physical node on an Ethernet
network. While the MAC address can be changed, it is highly
recommended not to change this address.
•
Original Factory MAC address
is the MAC address assigned by the
hardware manufacturer to the Ethernet adapter in the hardware. The
TC2201E comes initialized with this assigned MAC address.
• Ethernet MTU Size is the Maximum Transmission Unit (MTU) for
Ethernet. This setting can be configured for 1500 or 9000 byte frames.
The Ethernet Management port is permanently set to 1500 and cannot
be changed. The default setting for the iSCSI ports is also 1500 but a
value of 9000 can be configured for jumbo frame support for iSCSI
frames.
Note:
Override settings should not be changed except by or under
the direction of an authorized Quantum technician.