Quantum TC2201E, User Manual

Page: 131 / 202

Perform Configuration
Quantum TC2201E User’s Guide 111
• Select 6 to open the Change DNS Settings Menu. When DHCP is
disabled, this menu can be used to assign the DNS server IP address
and DNS domain.
Table 15 Change
DNS Settings Menu
• Select 1 to change the DNS Server IP Address. The IP address
should be similar in form to XXX.XXX.XXX.XXX where each XXX
represents an integer in the range of 1 to 255.
• Select 2 to change the DNS Domain. The text
“server.company.com” shown above is an example of how a
DNS Domain name could appear.
• Select 7 to change the Maximum Transmission Unit (MTU) for
Ethernet. This setting can be configured for 1500 or 9000 byte frames.
The Ethernet Management port is permanently set to 1500 and cannot
be changed. The default setting for the iSCSI ports is also 1500 but a
value of 9000 can be configured for jumbo frame support for iSCSI
frames.
Change DNS Settings Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
DNS Configuration - Port 1
DNS Server IP Address : XXX.XXX.XXX.XXX
DNS Domain : server.company.com
1) Change DNS Server IP Address
2) Change DNS Domain
X) Return to previous menu