Quantum TC2201E, User Manual

Page: 124 / 202

Power Up Messages
104 Quantum TC2201E User’s Guide
Power Up Messages
3
When you press the TC2201E’s power switch to the ‘ON’ position
(marked with a ‘ I ’ symbol), a series of messages similar to the following
appear on the terminal or terminal emulation program for the serial port
(See “Chapter 2, , Setting Up Serial Port Communications”) or the Telnet
utility for Telnet sessions.
A series of power-up self tests are performed while the TC2201E starts
(which can take up to 2 minutes), and messages related to these tests will
be visible from the serial port. If completed successfully, the main menu
will appear, as shown in Figure 7-1.
The main menu appears as follows:
Note:
The illustrations in this chapter use Xs to represent numeric
values for certain data fields, such as the product release
version and the revision of firmware.
Note:
For the serial port, if you do not see messages over the
Command Line Interface, you may need to re-check your
computer’s serial port settings.