Quantum TC2201E, User Manual

Page: 75 / 202

Chapter 3 Quantum Visual Manager
Main Menu
Quantum TC2201E User’s Guide 55
Figure 37 SCSI bus
Configuration Page
•
Primary Initiator ID
must be assigned an Initiator ID. This ID should be
a unique ID on the bus. The default setting is 7.
•
Discovery
enables/disables device discovery on this SCSI bus. The
default setting is
Enabled
.
•
Discovery Delay
is the time in seconds that the TC2201E waits after a
power-up or reboot process (which typically takes approximately 2
minutes) before starting to discover SCSI devices. Quantum
recommends you set the value to at least 2 seconds to ensure all SCSI
devices complete their individual power-ups. However, the user
should be aware this delay is added to the time it takes for the
TC2201E to reboot and for QVM to be active again. The default
setting is 2 seconds.