Quantum TC2201E, User Manual

Page: 144 / 202

Perform Configuration
124 Quantum TC2201E User’s Guide
• Select 2 from the ‘Device Mapping Main Menu’ to display the content
of the ‘Current’ map. This option displays all the entries in the map.
Information in the local part of the address(left) depends on the type
of protocol for which the map is defined. The specific device address
information depends on the protocol/port where the device resides.
Mapping a device to the same port where it resides is not allowed.
(i.e. you can not map a disk on iSCSI Port 0 to an address on iSCSI
Port 0.)
• Select 3 from the ‘Device Mapping Main Menu’ to add a map. This
option allows adding a new map for the current protocol/port or bus.
Once the map is created it becomes the ‘current’ map.
Table 26 Add a Map
• Select 4 from the ‘Device Mapping Main Menu’ to delete current
map. The screen will ask for confirmation before deleting the map.
After the map has been deleted, the default map for the current port
becomes the current map. Maps with names ‘Auto Assigned’ may
not be removed.
Add Current Map
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
Create iSCSI Map for Portal Group: Both Ports
Enter New Map Name (X=Cancel) > New Map
Created Map: 'New Map' for iSCSI Portal Group: Both Ports with ID=3