Quantum TC2201E, User Manual

Page: 38 / 202

Chapter 2 Getting Started
Interfaces and Connections
18 Quantum TC2201E User’s Guide
Figure 13 Port
locations
Air-exhaust
Vents
SCSI buses
iSCSI ports
Ethernet port
Serial port
Reset Button
Power
switch
Product ID labels
Figure 14 WWN/MAC
ID label
WWN Name
WWP Name
Ethernet MAC ID (Physical Address)
Power Information
iSCSI Connections
2
Before connecting the TC2201E to other iSCSI devices, it is important to
understand the configuration requirements of the environment to which
it will be connected. Failure to correctly configure an iSCSI device may
impair the operation of the network to which it is attached.
The iSCSI RJ-45 connectors on the unit can be directly connected to a
standard 10/100/1000BaseT Ethernet network.
Typical installations will have the TC2201E connected to an Ethernet
switch.
Ethernet switches may allow for individual ports to be configured for
different media types. The TC2201E must be connected to the switch port
with the appropriate Ethernet cabling for both the TC2201E and the
switch port to which it is connected.
Note:
For convenience in configuring ports, key information is
indicated on a label located on the back panel of the
TC2201E.