Chapter 4: F2000 Customer Replaceable Units (CRUs)
Interface Card Replacement
Quantum F2000 User’s Guide
117
Interface Card Replacement
This section describes how to replace a 100 Gb Ethernet card and a 32
Gb Fibre Channel card and includes the following information:
•
•
Interface Card Replacement Considerations
•
•
Note:
For a description of the 100 GbE card and 32 Gb Fibre Channel
card, see
.
Required Tools
You will need the following tools to complete this procedure:
• #0 screwdriver
• #2 Phillips screwdriver
• Notebook computer
• Ethernet cable
Interface Card
Replacement
Considerations
Take ESD precautions when replacing an interface card. Review
on page 68 before you begin the replacement procedure.
Remove an Interface
Card
To remove an interface card:
1
Identifying the canister that contains the failed interface card.
2
Connect the CAT6A Ethernet cable to the IPMI/BMC port on the