Chapter 4: F2000 Customer Replaceable Units (CRUs)
SSD Assembly Replacement
176
Quantum F2000 User’s Guide
If the drive has lost power or is missing, the system will return the
following message:
Keep the SSH connection to the Appliance Controller Console open
because you will need when performing
3
Go to the front of the F2000 and remove the bezel, if necessary.
4
Locate the degraded drive using the drive slot location provided in
the StorNext RAS ticket. Confirm that the degraded drive’s LEDs
show the following activity:
• Drive Fault LED is solid or blinking amber
• Drive Link/Active LED is NOT blinking green
See
for drive LED locations.
Note:
Refer to
on page 173 for
additional details on how to identify a degraded drive.
Figure 189 LED Location on an
SSD Assembly (Drive in Slot 01
Shown)
No action taken for detach request
Item
LED
Action
1
Drive Fault
Amber (solid or blinking): Degraded
drive reported. Replace the SSD.
