Chapter 4: F2000 Customer Replaceable Units (CRUs)
PIB Canister Replacement
Quantum F2000 User’s Guide
137
Install a PIB Canister
To install the PIB canister:
1
Line up the PIB canister with the chassis PIB canister guide.
2
Slowly slide the PIB Canister into the chassis until the card edge
touches the midplane connector (see
Figure 141 Installing the PIB
Canister
3
Press the PIB canister into the midplane connector.
4
Verify that the PIB canister is seated firmly.
5
Install the PSU into the chassis:
a
Orient the PSU so the PSU release latch is on top and the fan is
on the bottom.