Chapter 3: F2000 Basic Operations
Power On a Canister
Quantum F2000 User’s Guide
45
Figure 32 F2000 Rear -
Canister Locations
4
Under
Host is currently off
, select
Power On
to power on the
canister.
Note:
Do not use the
Power Cycle
,
Hard Reset
, or
ACPI
Shutdown
options. In addition, do not use any of the
options under
Peer canister Host is currently on
section.
5
Click
Perform Action
.
The system displays a dialog window with the message “Are you
sure to perform this operation?
6
Click
OK
.
The system then displays the following message on the page:
“Performing Power Action... Please wait”
The Fault LED on the front of the system and on the rear of the
canister turns off and the Power LED on the front of the system and
on the rear of the canister display solid green (see
Item
Description
1
Bottom canister
2
Top canister