![background image](http://html2.mh-extra.com/html/quantum/f2000/f2000_user-manual_3795639194.webp)
Chapter 4: F2000 Customer Replaceable Units (CRUs)
SSD Assembly Replacement
180
Quantum F2000 User’s Guide
4
Access the Appliance Controller Console and attach the new drive to
the system by running the following command:
The system identifies the new drive and attaches it. It returns the
following message if the drive attachment was successful:
After the drive is replaced and the
qstorage drive attach auto
command is run, rebuilds for the arrays occur in parallel.
5
Run the following command to show the status of the drive
recovery operation:
# qstorage drive attach auto
All new drives were successfully added
# qstorage show health