Chapter 4: F2000 Customer Replaceable Units (CRUs)
Interface Card Replacement
Quantum F2000 User’s Guide
133
10
If the system contains 32 Gb FC cards, connect the FC cables to the
FC ports in PCIe slot 1 and PCIe slot 3 on the top canister and the
bottom canister (see
).
11
Rotate the latch handles into the canister until the are fully
engaged. This applies power to the canister. The canister will power
itself on about 20 seconds after it is connected to power.
Figure 136 Latching the
Canister (Bottom Canister
Example)
12
Verify it is functioning properly:
a
Once the canister is physically powered-on, from a notebook
computer, access the BMC Web UI and log in.
Note:
Refer to
on page 30 in
Chapter 3, F2000 Basic Operations
Item
Description
1
Bottom canister PCIe slot locations.
2
Top canister PCIe slot locations.
