![background image](http://html2.mh-extra.com/html/quantum/f2000/f2000_user-manual_3795639046.webp)
Chapter 3: F2000 Basic Operations
Use the BMC Web UI
32
Quantum F2000 User’s Guide
6
Select
Use the following IP address
and then enter the following
information:
•
IP address
: 192.168.17.10
•
Subnet mask
: 255.255.255.0
7
Click
OK
, and then click
Close
.
Wait at least two minutes for the computer to set the IP addresses
on the local computer.
For Mac
The following procedure assumes you are using a Mac. Steps may differ
for your system, depending on your macOS version.
1
Select the
Apple menu > System Preferences> Network
, and
select the Ethernet connection.
In the
Configure IPv4
drop-down list, select
Manually
.
2
Enter the IP address and subnet mask values (leave gateway blank):
•
TCP/IPv4 address
: 192.168.17.10
•
Subnet mask
: 255.255.255.0
3
Click
Apply
.
4
Close the
Network
dialog.
Wait at least two minutes for the laptop to enable the network
connection.
Log Into the BMC Web UI
1
On the notebook computer, open a supported Web browser and
type
https://192.168.17.21
in the address box, and press
Enter
.
Note:
You must use “https://” the first time you access the BMC
Web UI through the IPMI/BMC port.