Chapter 4: F2000 Customer Replaceable Units (CRUs)
Chassis Replacement
Quantum F2000 User’s Guide
97
Verify the System is Up and Running
To verify the system:
1
Using a CAT6A Ethernet cable, connect a notebook computer to the
IPMI/BMC port on the top canister (see
).
Figure 91 IPMI/BMC Port
Location on the Top Canister
2
Access the BMC Web UI.
Note:
For instructions on how to access the BMC Web UI, refer to
.
3
On the BMC Web UI, verify that the canister does not report any
errors.
Note:
Refer to
Check the Status of a Canister
Check the System Inventory of a Canister
Chapter 3, F2000 Basic Operations
for instructions on how
to check for errors.
4
Disconnect the CAT6A Ethernet cable from the IPMI/BMC port on
the top canister.
5
Connect the CAT6A Ethernet cable to the IPMI/BMC port on the
bottom canister (see
Item
Description
1
IPMI/BMC port on the top canister